SONY USERS .... PLEASE READ!

Sony has several dish mounting bracket designs.

The earlier versions use a variation of a U-bolt or pipe clamp to  secure the dish to the mast.

Loosening the clamp enough to rotate the dish for the azimuth  alignment can allow the dish to dip down in elevation,  making it more difficult to locate the satellite.  Just be aware of this!

The later Sony has a split sleeve mounting bracket similar to other  manufacturers, as seen in the photo below. Thanks to Roy for sending the photo down from Alberta, Canada.

This bracket does not have the alignment difficulty mentioned above.

Sony requires a smaller diameter mast than other brands.  If your dish is a Sony, be sure to specify your BULLSEYE is for a Sony when you fill out the order form!!